|
BENEFITS
-
Affordable
-
Ease of Operation
-
Low Maintenance
-
Ensures Product Quality
The unique circuitry of our 750 Series
II
Resistivity Monitor/controllers guarantees accurate and
reliable measurements. Drift-free performance is assured by
"field proven" electronics, including automatic DC offset
compensation and highly accurate drive voltage.
Since Temperature Compensation is at the heart of accurate
water measurement, all Myron L Monitor/controllers feature
a highly refined and precise TC circuit. This feature
perfectly matches the water temperature coefficient as it
changes. All models are corrected to 25°C. The TC may be
disabled to conform with USP requirements.
Built-in electronic calibration allows for fast quality
checks.
A
push-to-test button makes setpoint checks easy, while the
internal alarm set discourages unauthorized adjustments.
Standard on all controller models is a heavy-duty, 10-amp
output relay, operating on either increasing or decreasing
readings. Bright green/red LEDs indicate readings above or
below setpoint.
Digital and
Analog 750 Series
II models
have an IP65/NEMA 4X water-resistant & corrosion-proof rated
enclosure. At 152 x 122 mm/6 x 4.8 in., all models are
suitable for panel, bench or surface mounting.
Additional
options include a 3 Sensor Input Switch and/or a 3 Range
Switch and a Remote Alarm™ model RA.
RESISTIVITY
SENSORS
All 750
Series
II
Resistivity models require a CS10 series sensor. This
reliable sensor features two integral thermistors to ensure
accurate and rapid automatic temperature compensation. The
sturdy polypropylene standard bushing is modular for easy,
inexpensive replacement. A PVDF or 316 stainless steel
bushing can also be ordered. The metal portion is available
in either 316 stainless steel (standard) or titanium.
Note:
Special Order, CS40 and CS41, High Temperature/High Pressure sensors
available upon request.
CUSTOM & OEM MODELS AVAILABLE
|
